If the cutting of miter joints is your type of work, then there can be rare comparisons with the Dewalt DW713 miter saw. This miter saw is provided with almost all the necessities of a good miter saw and makes the cutting of the joints at precise angles accurate and perfect. There are no jagged edges or the final chipped off blow as the saw hones the surface into perfection as it progresses with the cutting. Without going into complicated details, it would be worthwhile if one goes along the Dewalt DW713 Review comments from the users of the saw.
Professionals would undoubtedly find that the saw is exceptional as it provides for cutting angles tilting to a fantastic 45 degrees at both sides. The tilting of the angles is supported by bevel stops, which can be screwed to hold the blade in place while the saw is functioning. There are convenient bevel stops from 0 to 45 degrees and a few more inches beyond the 45 degrees can be extracted with a careful tilting further to the left or the right.
Dewalt Saw Blade
As it normally happens, the Dewalt DW713 Review statistics show that most users are concerned about the safety of the bevel technology and the accidental sliding off during high-speed cutting jobs. The saw seems to be doing an excellent job as far as these safety features are concerned. The bevel stops are rock solid and the blade casing is so aligned that it would be very unlikely to allow any contact with the blade while the saw is in operation. However, in spite of all precautions it would always be better to be very attentive and careful in the use of the saw. The saw is good as a home tool and for those who have small home businesses of manufacturing picture frames, pipe bends and molding. Picture frames require the accurate jointing of the opposite faces of the wooden frames and they fit in accurately without any further polishing required to give it a natural finish.
Good sides:
quite accurate durable good hand holds smooth adjustments from side to side fast cutting
Apart from the cutting technology and the bevel angles, the saw comes packed in a strong box and unpacking does not involve rocket science. Just lift the handle and slide the Dewalt DW713 out and you are done. This is what most users doing a Dewalt DW713 Review have to say. The down-to-earth uncomplicated mechanism of the Dewalt DW713 makes it possible for anyone with a liking for power tools to use the saw as smoothly as ever. Some even go further and say that the blade performance is exceptional - cutting like pressing a knife through soft butter. It is easy on the hands too and there is no vibration at all. You can use the saw with no worries about the performance.
Special Price!!! Freud D1080X Diablo 10-Inch 80-tooth ATB Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating
Click for larger image and other views
Freud D1080X Diablo 10-Inch 80-tooth ATB Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating Feature
- 10-inch 80T ultra fine finish cut-off blade with a laser-cut 5/8-inch arbor
- Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
- Heat expansion slots let blade expand due to heat build-up; durable micrograin titanium carbide
- Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability
- Laser cut arbor for accurate blade rotation reducing vibration and premature wear
Freud D1080X Diablo 10-Inch 80-tooth ATB Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating Overview
FREUD SAW BLADE *10" *80T *5/8" arbor *Ultra finish cut *Super thin laser cut kerf *"Red" Perma-Shield coated *Laser cut stabilizer vents *Laser cut heat expansion slotsFreud D1080X Diablo 10-Inch 80-tooth ATB Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating Specifications
For a blade dedicated to cutting ultra-fine finish work with remarkably clean, chip-free results, look no further than the Freud D1080X Diablo 10-Inch Ultra-Fine-Finish Saw Blade. Ideal for fine cabinetmaking, this is your go-to blade for slicing through oak, pine, melamine, veneer plywood, and delicate molding. For strong, long-lasting resistance, the blades feature a tough steel plate and high-density carbide tips. |
 |
|
Achieving premium results when creating finish crosscuts in ultra-fine materials is all about clean, accurate cuts. The Freud D1080X makes this process easy, fast, and precise. To save you time, most cuts made by this blade require little to no sanding.
Trim carpenters, fine cabinetmakers, and avid do-it-yourselfers will want to keep this blade on hand for those special jobs that call for making ultra-fine finish crosscuts in delicate pieces. Appropriate application materials include oak, pine, melamine, veneer plywood, and delicate molding.
Produces Smooth, Quiet Cuts with Laser-Cut Kerf
The Freud D1080X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 80 Hi-ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.
An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.
Features Shock-Resistant Carbide for Long-Lasting Precision
So you can count on it over the long term, the Freud D1080X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.
Fits Miter and Table Saws
The Freud D1080X is a great addition to your workshop because it's designed with the versatility to fit a variety of table and miter saws, including sliding miter saws.
This product is covered by Freud's Limited Lifetime Warranty.
What's in the Box
Freud D1080X Diablo 10-Inch Ultra-Fine-Finish Saw Blade.
SAVE NOW on the special offers below!
Available In Stock. |
| This Freud D1080X Diablo 10-Inch 80-tooth ATB Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating ships for FREE with Super Saver Shipping. |
Price : Click to Check Update Prices Please. |
